Polyurethane shoe glue, 20 ml blister pack

A professional, super-strong adhesive for cold bonding without hardeners or thermal activation. It is characterized by its high flexibility. The resulting joint is transparent and waterproof.

Product parameters span
Contents 20 ml
Packaging display No
Danger No
Number of consumer packs 1 pc.
Packaging dimensions (WxHxD) 110 x 195 x 230 mm brRecycling packaging no.
Primary packaging type: cardboard
Gross unit weight 0.04 kg
Gross weight 432 g
CN code 3506 10 00
Consumer packaging type blister pack
Additional product description Instructions for use: 1. Surface preparation: Roughen the bonded elements with sandpaper, clean them, and degrease them with Drachen acetone. Wash PVC backings 30 minutes before bonding with Drachen universal thinner. The prepared surface is ready for bonding after 2 hours. 2. Tools: Apply the adhesive with a brush. 3. Temperature during work: Work at a temperature of +5 °C to +25 °C (air, substrate, and adhesive temperature). 4. Recommendations: Prime porous materials with glue and allow to dry completely. Apply the adhesive by rubbing it thoroughly onto the previously prepared surfaces. 30-60 minutes after applying the adhesive, press the bonded elements firmly for 30 seconds. 5. Cleaning tools and dirty elements: Dirty tools and fresh stains should be washed with Drachen universal thinner. Dried-on dirt can only be removed mechanically. 6. Adhesive dilution: It is not recommended to dilute the adhesive. Notes: Transport and storage conditions: Transport and store in the tightly sealed original packaging at a temperature of 0°C to +30°C. Keep out of reach of children. Other information: After completion of work, the room should be thoroughly ventilated until the characteristic odor disappears. Does not stick to PP, PE, or PTFE.