Adhesive for PVC 20 ml Blister Dragon

Aggressive adhesive characterized by rapid action. The adhesive is characterized by rapid action. It is used in hydraulics, electrical engineering, etc.

Product parameters /
Capacity 20 ml
Packaging display No
Danger No
Number of consumer packs 1 piece
Packaging dimensions (WxHxD) 105 x 185 x 30 mm
Recycling packaging no.
Primary packaging type: cardboard
Gross unit weight 0.04 kg
Gross weight 432 g
CN code 3506 10 00
Consumer packaging type blister pack
Additional product description Instructions for use: 1. Surface preparation: The surfaces to be bonded should be roughened with sandpaper and degreased with Drachen "universal thinner". 2. Tools: Apply the adhesive with a brush or spatula. 3. Temperature during work: Work at a temperature of +15 °C to +25 °C (air, substrate and adhesive element temperature). 4. Recommendations: The larger the gaps, the thicker the adhesive is applied to the pipes. Remove excess adhesive. After the connection has been made, it must not be moved for 30-60 minutes. If the pipe-coupling tolerance is less than 0.3 mm, the elements will be immobile after approximately 1 second and the connection can be slightly loaded after just 1 minute. 5. Cleaning tools and dirty elements: Dirty tools and fresh stains should be cleaned with Drachen "acetone". Dried-on dirt can only be removed mechanically. Notes: Transport and storage conditions: Transport and store in tightly sealed original packaging at a temperature between 0 degrees C and +25 degrees C. Keep out of reach of children. Other information: After completion of work, the room should be thoroughly ventilated until the characteristic odor disappears. Use for rigid PVC products. When bonding soft PVC films, an adhesion test should be conducted on a small area.