Butapren adhesive 20 ml blister

Easy-to-use, solvent-based contact adhesive. It cures quickly without discoloring the bonded elements.

Product parameters /span
Contents 20 ml
Packaging display No
Danger No
Number of consumer packs 1 pc.
Packaging dimensions (WxHxD) 110 x 195 x 230 mm brRecycled packaging No
Primary packaging type: cardboard
Gross weight 0.04 kg
Gross weight 36 g
CN code 3506 10 00
Consumer packaging type blister pack
Additional product description Application: 1. Surface preparation: Roughen the bonded surfaces, clean them thoroughly and remove dust. Wash greasy areas with "extraction petrol" Dragon or "acetone" Dragon. 2. Tools: Apply the adhesive with a brush with stiff bristles. 3. Temperature during work: Work at a temperature of +18 °C to +25 °C (temperature of air, substrate and bonded elements). 4. Recommendations: Mix the adhesive thoroughly before use. Coat the bonding surfaces with a thin layer of adhesive. Recoat porous surfaces after drying. After approx. 10 - 15 minutes, press firmly for approx. 30 minutes. After completing the work, tightly close the packaging with the adhesive. 5. Cleaning of tools and dirty parts: Dirty tools and fresh stains should be cleaned with "universal thinner" Dragon. Dried adhesive can only be removed mechanically. 7. Restrictions and notes: If in doubt, check the resistance of the material to the surface. Diluting the adhesive reduces its bond strength. To increase the flexibility of the bond, greater pressure must be applied. Notes: Transport and storage conditions: Transport and store the product in its tightly sealed original packaging at a temperature of 0°C to +30°C. Keep away from fire and ensure good ventilation. Keep out of reach of children.