Wood glue 20 ml blister dragon

Professional high-performance adhesive for bonding wood indoors. Contains no organic solvents.

Product parameters /strong
Contents 20 ml
Packaging display No
Danger No
Number of consumer packs 1 piece
Packaging dimensions (WxHxD) 105 x 185 x 30 mm
Recycling packaging no.
Primary packaging type: cardboard
Gross unit weight 0.04 kg
Gross weight 432 g
CN code 3506 10 00
Consumer packaging type blister pack
Additional product description Instructions for use: 1. Surface preparation: Thoroughly clean the bonded surfaces, degrease with acetone, and adjust them to each other. Wipe the plastic elements at the joint with sandpaper. Remove old paint residue with Dragon Paint Remover. Glued wood should be dry and have a moisture content of 8% to 12%. The relative humidity should be 40-70%. 2. Temperature during work: Work at a temperature above +10 degrees Celsius (temperature of the air, substrate, and bonded elements). 3. Recommendations: Before starting work, the package contents should be thoroughly mixed. Apply a thin layer of adhesive to one of the surfaces to be joined, wait 4 minutes, and then press the bonded elements together. The bond will reach full strength after approximately 24 hours. After completing the work, tightly close the container with the adhesive. 4. Cleaning of tools and contaminated elements: Clean dirty tools and fresh stains with water. Dried adhesive can only be removed mechanically after soaking in warm water. 5. Glue dilution: It is not recommended to dilute the adhesive. In special cases, it can be diluted with water. Remarks: Transport and storage conditions: Transport and storage in tightly closed original packaging at a temperature of +5 °C to +30 °C. Keep out of reach of children. Other information: After completion of work, the room should be thoroughly ventilated until the characteristic odor disappears. Use with efficient ventilation away from fire. Does not stick to PP, PE, PTFE. Frozen adhesive permanently loses its properties.