Adhesive for 20 ml plastic blisters Dragon

Clear, aggressive, and super strong. Creates tough, watertight bonds.

Product parameters
Contents 20 ml
Display packaging No
Danger No
Number of consumer packages 1 piece.
Packaging dimensions (WxHxD) 105 x 185 x 30 mm br Recycling packaging No
Primary packaging type: cardboard
Gross weight 0.04 kg
Gross weight 36 g
CN code 3506 10 00
Consumer packaging type blister pack
Additional Description Product Instructions for Use: 1. Surface preparation: Thoroughly clean the bonding surfaces of dust, degrease them (e.g. with "extraction petrol" or "dragon" acetone), dry them and, if possible, match them. 2. Tools: Apply the adhesive with a spatula or brush. 3. Temperature during work: Work at a temperature above +5 degrees Celsius (air, substrate and bonding element temperature). 4. Recommendations: Apply a thin layer of adhesive to one of the surfaces to be bonded and then join them together immediately. 5. Cleaning of tools and contaminated parts: Wash contaminated tools with "dragon" acetone before they dry. Once cured, the adhesive can only be removed mechanically. Notes: Transport and storage conditions: Transport and storage in tightly closed original packaging at a temperature of +5 °C to +35 °C. Keep out of reach of children. Other information: After completion of work, the room should be thoroughly ventilated until the characteristic odor disappears. Do not use on Teflon, polyethylene, polypropylene, or expanded polystyrene (Styrofoam). The adhesive can be aggressive to some plastics; if in doubt, test on an inconspicuous surface.